Filter
Top Products
19
LX5550
18
LX5550
The Battery
The phone comes with a rechargeable battery. Keep
the battery charged while not in use in order to
maximize talk and standby time. The battery charge
level is shown at the top of the LCD screen.
Installing the Battery
To install the battery, insert the bottom of the battery
into the opening on the back of the phone. Push the
battery down until the latch clicks.
Removing the Battery
Turn the power off. Lift the release latch to detach the
battery.
NOTE: It is important to fully charge the battery
before initial use of the phone.
Charging the Battery
Warning! Use only the standard charger provided
with the phone. Using any charger other than the
one included with the LX5550 may damage your
phone or battery.
1. Plug the standard charger into a wall outlet. The
phone must be charged from a 120V AC power
source.
2. Plug the standard charger into the phone. The
red light indicates the battery is charging and the
green light indicates the battery is fully charged.
The charge time varies depending upon the
battery level. The maximum charge time for a
fully discharged battery is 3 hours.
Battery Charge Level
The battery charge level is shown at the top right of
the LCD screen. When the battery charge level
becomes low, the low battery sensor alerts you in
three ways: sounding an audible tone, blinking the
battery icon, and displaying LOW BATTERY WARNING!
If the battery charge level becomes exceedingly low,
the phone automatically switches off and any
function in progress is not saved.
Fully DischargedFully Charged
Getting Y
Getting Y
our Phone Star
our Phone Star
ted
ted
Release
latch
Slot
LX5550(E)-USC.QXD 04/2/26 10:16 AM Page 18