Filter
Top Products
VX3100
83
VX3100
82
Ring Type (Menu )
1. Press Soft Key 1 Menu.
2. Press Settings.
3. Press Sounds and then press Ring Type.
4. Select one of six ring types Ring, Vibrate, Vib1+Ring,
Vib2+Ring, Vib3+Ring and Lamp with .
NOTE: The number after Vib means the number of
vibrations.
5. Press Soft Key 1 Ok to save the ring type.
Ring Volume (Menu )
1. Press Soft Key 1 Menu.
2. Press Settings.
3. Press Sounds and then press Ring Volume.
4. Adjust the volume of the ringer or level of the vibrate
with .
5. Press Soft Key 1 Ok to save the ring volume or vibrate
level.
Ear Volume (Menu )
1. Press Soft Key 1 Menu.
2. Press Settings.
3. Press Sounds and press Ear Volume.
M
ENU
F
EATURES
Key Tone (Menu )
To set the Key Tone length and touch tone playback
speed:
1. Press Soft Key 1 Menu.
2. Press Settings.
3. Press Sounds and then press Key Tone.
4.Set Normal / Long with and press Soft Key 1 Ok.
Normal Sends out a tone for a fixed period of
time even if you keep the key pressed.
Long Sends out a continuous tone for as long
as you keep the key pressed.
NOTE: Use the side key buttons. The upper button
increases the volume and the lower button decreases
the volume.
NOTE: Dual-Tone Multi Frequency (DTMF) Signaling
works by the simultaneous transmission of two
tones, one from a group of low frequencies and
another from a group of high frequencies. Each
group of frequencies consists of four frequencies.
Setting Key Beep length to long extends the DTMF
tone. Press Menu, then Key Tone Using then Long.
Press Soft Key 1 Ok.
VX3100.qxd 4/26/03 12:21 PM Page 82