Filter
Top Products
VX3100
89
VX3100
88
Auto NAM (Menu )
Allows the phone to automatically switch between
programmed telephone numbers corresponding to the
service provider area.
1. Press Soft Key 1 Menu.
2. Press Settings.
3. Press System and then press Auto NAM.
3. Select On or Off and press .
Serving Sys (Menu )
You can identify the channel number of a system that is
served and a SID Number. This information is only for
technical support.
1. Press Soft Key 1 Menu.
2. Press Settings.
3. Press System and then press Serving
Sys.
TTY Mode (Menu )
Users can attach a portable TTY device to the 2.5 mm
jack on the phone and communicate with other parties
using a TTY. TTY users must have a TTY/TDD device.
1. Attach a TTY cable to the 2.5 mm jack, located on the
top of the handset.
M
ENU
F
EATURES
System (Menu )
Select System (Menu )
This function enables you to set up the phone
producer’s management environment. Leave this
setting as the default unless you want to alter system
selection as instructed by your service provider.
1. Press Soft Key 1 Menu.
2. Press Settings.
3. Press System and then press Select
System.
3. Select an option and press .
Home Only/Automatic_A/Automatic_B displays.
Set NAM (Menu )
Select the phone’s NAM (Number Assignment Module)
if the phone is registered with multiple service providers.
1. Press Soft Key 1 Menu.
2. Press Settings.
3. Press System and then press Set NAM.
3. Select NAM1 or NAM2 and press .
VX3100.qxd 4/26/03 12:21 PM Page 88