Filter
Top Products
VX3300 13
Getting Started with Your Phone
The Battery
NNOOTTEE
: It is important to fully charge the battery before initial
use of the phone.
The phone comes with a rechargeable battery. Keep the battery
charged while not in use in order to maximize talk and standby
time. The battery charge level is shown at the top of the LCD
screen.
Installing the Battery
To install the battery, insert the battery into the opening on the
back of the phone. Put the battery cover on the battery and
push it slightly upwards.
Removing the Battery
Turn the power off. Lift the release latch to detach the battery.
Charging the Battery
To use the charger provided with your phone:
Warning! Use only the charger provided with the phone. Using
any charger other than the one included with the VX3300 may
damage your phone or battery.
1. Plug the round end of the adapter into the phone’s charger
jack and the other end into an electrical outlet.
2. The charge time varies depending upon the battery level.
The maximum charge time for a fully discharged battery is
3.5 hours.
Battery Charge Level
The battery charge level is shown at the top right of the LCD
screen. When the battery charge level becomes low, the low
battery sensor alerts you in three ways: sounding an audible
tone, blinking the battery icon, and displaying Low Battery. If the
battery charge level becomes exceedingly low, the phone
automatically switches off and any function in progress is not
saved.
Changing the face plate
Fully DischargedFully Charged
To change the face plate, hold
the phone as shown in the
picture and slide it downwards
and off to detach.
The phone is now ready for the
new plate. Slide the new plate
upwards fully until it clicks.
slot