Filter
Top Products
19
Battery Temperature Protection
If the battery gets overheated, the
phone will automatically turn off.
When you turn the phone back on,
a message pops up alerting you
that the phone was powered off for
your safety.
Battery Charge Level
You can find the battery charge
level at the top right of the LCD
screen. When the charge level
becomes low, the battery sensor
sounds a warning tone, blinks the
battery icon, and displays a
warning message. As the charge
level approaches empty, the phone
automatically switches off without
saving.
Signal Strength
Call quality depends on the signal
strength in your area. You can tell
how much signal strength you have
by the number of bars next to the
signal strength icon: the more bars,
the stronger the signal. If you’re
having problems with signal quality,
move to an open area or, when
inside a building, try moving near a
window.
Turning the Phone On and Off
Turning the Phone On
1. Install a charged battery or
connect the phone to an external
power source.
2. Press (located above the
on the keypad) until the
LCD screen lights up.
Turning the Phone Off
1. Press and hold until the
display turns off.
Making Calls
1. Make sure the phone is turned
on.
If not, press for about three
seconds.
If necessary, enter the lock code.
The lock code is the last 4 digits
of your mobile phone number if it
is set.
2. Enter the phone number.
3. Press .
4. Press to end the call.
NOTE
Your phone has a Voice Commands
feature that also lets you make calls
by phone number, name, or location
(see page 78).