Maxon Telecom MX-6880 Cell Phone User Manual


 
Calls to a Fixed Phone Extension
some fixed extension phones cannot be called directly,
you need to connect to the exchange before dialling the
extension number. The phone will do all the dialling for
you with one key press provided that you enter a pause
(-) between the telephone (exchange) number and the
extension number. To enter a pause, press three
times (shown as below)
AREA CODE NUMBER EXTENSION
(if used)
International Calls
unlike most fixed phones, you dont need to enter a
separate exit code to get an international line out of the
country you are calling from, simply enter + (by pressing
until + is displayed), the code of the country you are
calling and the full telephone number
COUNTRY CODE FULL NUMBER
for example, to make a call to France:
(+ displayed) Ⅲ Ⅲ FULL NUMBER
Call List
called and received numbers are stored as a list in the
phone with the last number at the top of the list. Each
number is identified as outgoing, incoming, SMS or
missed. Old numbers are automatically deleted when the
call list is full. To see the list
(latest) (search)
any displayed number on the list can be dialled by
pressing
the call list can be reset (cleared)
Ⅲ Ⅲ
ENGLISH
2
2.2
ENGLISH
2
2.1
Making Calls
The network operator name must
appear in the center of the display
before you can make or receive calls.
Signal strength is indicated by the
bars in the top right of the display (six
bars for optimum signal strength).
Call quality can be affected by physical obstructions, so
moving only a few metres may significantly improve signal
strength.
National Calls
if the country you are operating
in uses area codes, they must
be included even when making
local calls.
CALLING appears during
dialling and changes to
ACTIVE when connected
AREA CODE NUMBER
(if used)
to hang up at the end of the call press or close the flip
(even if the other person hangs up first)