Filter
Top Products
Mitel 5603 Wireless Handset User Guide
10
Alphanumeric Keys
Figure 5: Available Characters
In standby mode, and number input mode
• A short press on a key enter the digits “0” - “9” and the characters * and #.
• Enter a pause in number input mode by a long press on the # -key. A pause is indicated
by a "P" in the display.
• A long press on the * - key changes the tone sender on.
Tone sender on is indicated by a "T" in the display.
• The keys "0", "2" - "9" can be used for speed dialing. Press and hold any of the keys to
access a contact beginning with a specific letter. For example, to access a contact beginning
with the letter "A", press and hold the key "2" and then press "Call" to speed dial.
In text input mode
• A short press on a key 0-9, displays the first available character on that specific key. The
marked character is selected after a timeout, or when another key is pressed.
• To change to upper/lower case, press the * key before entering the character.
The * key can also be used to display only the digits.
• To add space in the text, make a short press on key 0.
• The first character entered when adding/editing a name in the Contacts menu, will be an
upper level character followed by lower level characters, unless the * key is pressed before
entering the character. To switch between Abc, ABC, abc, and 123 the * key is pressed.
• A long press on the #-key displays special characters.
Note: Depending on the selected menu language, other characters can be available.
This means that the character order can differ from the table above.