Filter
Top Products
Navigate the Menu
45
Subscribe Handset in IP-DECT System Manually
To subscribe an IP-DECT system manually, the “Park:” (Portable Access Right Key) and “Ac:”
(Authentication code) related to the system are needed. Contact the system administrator for
more information. If the handset subscribes to an additional system, it must also be added
manually.
The IPEI/IPED code is a unique code which has been assigned to the handset. See also “Admin
Menu” on page 47.
1. Select "System".
2. Select "Subscribe".
3. Enter System name (optional). If no system name is entered, the default name will be used.
That is System A, System B, depending on which system name is free.
4. Press "Next".
5. Enter PARK code (max. 31 digits). The PARK code may not be required if there is no alien
DECT system within the coverage area.
6. Enter AC code. Press "Next".
An information text "Protection on?" appears.
7. Select "Yes" if the new system needs to be protected. It is not possible to delete a protected
subscription from the System menu
1
.
8. Press "OK". A searching mode starts.
Unsubscribe System
1. Select "Unsubscribe"
1
.
2. Select the system to unsubscribe in the list.
3. Press "Select".
4. Press "Yes" to unsubscribe the system. Otherwise, press "No".
Rename System
You can change the name of the system in the handset.
1. Select "Rename System".
2. Select the system to rename.
3. Press "Edit"
4. Enter new name.
5. Select "Save".
Note: The PARK code may not be required if there is no alien DECT system within the
coverage area.
1. It is not possible to unsubscribe a protected system via the System menu. The unsubscripiton must be made via the Admin
menu or the DECT system.