Filter
Top Products
Making and Answering Calls
15
Dial a Number from the Company Phonebook
1. Press the "Menu" soft key.
2. Select "Contacts".
3. Select "Call contact".
4. The local and company phonebook appears in the same list but the company names are
indicated by a “Locked entry” icon in front of the name. Select contact from list, or search
name/number by entering characters in the "Search" field.
5. Press or the "Call" key to make the call.
Answer a Call
The flashing LED, accompanied by a ring signal and/or a vibrating handset, notifies you of calls.
The ring signal and vibrator can be disabled. The calling party’s handset number or name is
shown. The name will be shown if the calling party’s handset number is stored in the local
phonebook. When a headset is connected to the handset, the answering button on the headset
can be used to answer the call.
Other answering methods can be specified in the Settings menu. See the Mitel 5603 Wireless
Handset Configuration Guide. The answering methods are Automatically and Loudspeaking.
When “Automatically” is enabled, all incoming calls will be connected automatically.
Answer a Call
When the signal sounds press to answer the call, or press the soft key to answer the
call in loudspeaking mode. The name/number of the calling party appears if calling line
information is available.
End a Call
Press to end the call. The duration of the call is shown in the display. The total time of the
call can also be retrieved from the Calls menu > Call time.
During a Call
If configured in the PDM/WSM, you can call an emergency call while the handset/ keypad is
locked. During the ongoing emergency call, the soft key "More" and the soft key "R" are disabled.
Note: you can to access the Company phonebook by pressing the soft key in idle
mode.
Note: Some of these functions are system dependent. The options are set up in the
Portable Device Manager (PDM). See the Mitel 5603 Wireless Handset Configuration
Manual and Portable Device Manager (PDM) Installation and Operation Manual.