Filter
Top Products
Using the MH 110 Wireless Telephone 2-7
Mobile Handset 110 Wireless Telephone and Desktop Charger User Guide - Revision 1
Table 2-3 MH 110 Status Indicators
The Wireless Telephone Headset
NEC Business Solutions Ltd. offers optional headsets for use in noisy
environments or if you need to have your hands free while talking on
the Wireless Telephone.
To use the headset, simply plug it into the jack on the bottom of the
Wireless Telephone. The headset is specially designed to work properly
with the MH110 Wireless Telephone. We do not recommend using other
headsets.
Figure 2-3
Bottom of the MH110 Wireless Telephone
Status Indicators Descriptions
No Service Message An alarm sounds and a descriptive message displays when the
Wireless Telephone cannot receive or place calls. You may be
outside of the covered area. Walk back into the coverage area.
The in-service tone indicates service is re-established. If
functionality does not return, note the error message and contact
your system administrator.
The battery icon displays and a soft beep will be heard while the
Wireless Telephone is in use whenever the Battery Pack charge is
low. User has 15-30 minutes of Battery Pack life left.
Battery low This message will display and an alarm will sound while the
Wireless Telephone is idle whenever the Battery Pack is critically
low. The Wireless Telephone cannot be used until the Battery
Pack is charged.
The voicemail icon indicates that you have a new voicemail
message.
Melody A melody is played after the Wireless Telephone is powered on for
the first time following a completed charge (Charge Complete).
Charging contacts
Headset jack