Filter
Top Products
3-1
Mobile Handset 110 Wireless Telephone and Desktop Charger User Guide - Revision 1
3
Using the MH110 Desktop Charger
The MH110 Desktop Charger is designed to charge the Nickel Metal
Hydride (NiMH) Battery Packs. Full charging is accomplished in
approximately one and a half hours. Chargers operate in a 50° to 85° F
(10° to 30° C) environment. Do not expose them to freezing
temperatures or direct sunlight.
The MH110 Desktop Charger is shipped with the appropriate power
supply for the site's location. Place the MH110 Desktop Charger on a
flat, horizontal surface. Plug the power supply into the MH110 Desktop
Charger and into an appropriate wall outlet.
Chapter Topics • Using the MH110 Desktop Charger
• Cleaning the MH110 Desktop Charger
• Important Notice
Using the MH110 Desktop Charger
The user must end any call in progress by pressing the Power Off/End
Call button on the Wireless Telephone before placing the handset into
the MH110 Desktop Charger. The Wireless Telephone may be off or in
standby mode during charging.
Indicator Light Place the MH110 Wireless Telephone into the MH110 Desktop Charger
slot facing forward. If the Wireless Telephone is placed correctly, the red
indicator light will come on. The indicator light will not come on when
the slot is empty, when the MH110 Wireless Telephone is improperly
seated, or when the MH110 Desktop Charger has no power applied.
Charging Indicator If the Wireless Telephone is in standby mode, it displays its extension
number and Charging. . . . If the Wireless Telephone is turned off, only
Charging. . . displays. The dots will be racing during the charging cycle.
It is normal for the Battery Pack to become warm when charging.
Charge Complete Charge Complete displays when the Wireless Telephone is fully
charged. The indicator light remains on until the Wireless Telephone is
removed.
CAUTION
Do not place anything in the MH110 Desktop Charger other than the Wireless
Telephone. You might damage the contacts. Bent contacts can keep the Wireless
Telephone from charging.