Filter
Top Products
NDA-30044 Revision 2.0 Page 7
Location Status Information - User Guide
To Call an Extension
The LCD displays: What you do:
When an error message
is displayed:
Set–1 Vw–2 Cn–3 To call an extension from the
D
term
keypad:
Enter the extension number to
call and then “#”.
Invalid Option=An entry, other
than 1, 2, 3, or an extension or
number to call, has been made.
Enter “#” and try again, or press
the LSI key to end the session.
If the employee
location is set for the
entered extension, the
status is displayed.
OR
If the employee
location is not set or
the number is not in
the LSI database, LSI
will attempt to place
the call, putting D
term
in speaker mode. LSI
then exits OAI mode.
OR
If more than one
employee name is
entered for that
extension, LSI
displays the names.
To scroll through the status
entered before, date and time of
return (if any), and alternative
number, if any:
Enter “3#” after each display.
To call the alternative number
while the number is displayed:
Enter “0#”.
To select a highlighted name:
Enter “0#“.
To scroll through the names:
Enter “#”.
To see the status of the “nth”
employee:
Enter a number and then “#”.
Line is Busy=The called
extension is busy.
Your Line Busy=Your extension
is off-hook.
Can’t Place Call=The call failed
for a reason other than those
shown above.