Page 2 NDA-30044 Revision 2.0
Location Status Information - User Guide
To Set Location Information
When you are going to be away from your office and wish to leave location
information for others to retrieve, press the D
term
function key assigned to LSI and
follow the procedure below:
The LCD displays: What you do:
When an error message
is displayed:
Set–1 Vw–2 Cn–3On the D
term
keypad, enter “1”
and then “#” to choose the Set
function.
Invalid Option=An entry
other than 1, 2, 3, or an
extension or number to call
has been made. Enter “#”
and try again, or press the
LSI key to end the session.
Enter Extension Enter the extension number of
the Dterm at which you are
working, and then “#”.
Entering just “#” causes LSI to
default to the extension at
which you are now working.
Invalid Extn=An
extension that is not in the
LSI database has been
entered at the keypad.
Enter “#” to display the
prompt again, or press the
LSI key to end the session.
Enter Code Enter your personal access
code and then a “#”. If more
than one employee is assigned
to the extension just entered,
this code is used to determine
which employee is using the
application.
Invalid Code=LSI does
not recognize the entered
code. Enter “#” to display
the prompt again, or press
the LSI key to end the
session.
A location is displayed;
for instance,
On Vacation
or
In a Meeting
To display the next location:
Enter a “#”. Continue until
the desired message is
displayed.
To select a location:
Enter “0#” to select the
displayed location.
or
Enter the number of the
desired message, if known,
and then “#”.