Filter
Top Products
-16-
2) Press 6.
3) Press CLR. Phone will re-initialize on the NAM selected.
PAUSE DIALING
PAUSES - FCN + 9 . This function creates pauses while
sending out DTMF signaling tones during conversation
mode. When a manual pause is encountered in the DTMF
string, the phone will pause indefinitely, until the user presses
the SND key.
More than one pause may be placed in a sequence,
separating several groups of DTMF digits.
For example, this function may be used for calling a paging
system and sending commands, ID numbers (PIN), and/or
numeric messages:
(1) (2) (3) (4) (5)
“123456789” + “P” + “123456789#” + SND + SND
(1) This is the phone number to be called via the cellular
system.
(2) This character indicates a Manual Pause. The user will
wait for the initial prompt from the paging system before
pressing the SND key.
(3) This is a DTMF digit sequence which may represent the
PIN of the called pager.
(4) This is the initial send keypress which causes the phone
to initiate a call using the number up to the first pause mark.
(5) This is the second send keypress, while in conversation
mode, which will end the manual pause and start the sending
of DTMF digits.
ROAMING (SYSTEM SELECT)
Each cellular service area can have two cellular service
suppliers called carriers. One carrier is called the ‘non-
wireline’ or ‘A’ system and the other carrier is called the
‘wireline’ or ‘B’ system. Your phone is designed to work with
either or both carriers.The system priority feature allows you
to program your phone for optimum operation when in your
home serving area or when away from your home area. This
is called roaming. When you buy your phone, you may
register (receive a phone number) with either or both of your
PWR
P - 2 2 1 4
2 3 4 - 4 5 6 7