Filter
Top Products
En_01
19
Step 4: Network Settings
❚❚Image Transfer, Camera Control, and HTTP Server
If you selected any of the above options in Step 4 on page 9, follow
the steps below to connect to an existing network.
1 Choose whether to copy the profile
to the computer.
Highlight one of the options at right and
press 2. To copy the new WT-5 network
profile to the computer (022), select Ye s
(note that ad hoc settings can not be copied to a computer
running Mac OS X and that infrastructure settings can not be
copied under Mac OS X 10.4 and 10.5, and that network
settings for other operating systems may be overwritten).
A Routers
Connection to computers on other networks via a router is supported only
when HTTP server is selected.
A MAC Address Filtering
If the network using MAC address filtering, the filter must be supplied with
the MAC address of the WT-5. After attaching the WT-5 to the camera,
choose Network settings > Options > MAC address from the camera
setup menu and note the MAC address.