Nikon 6MWA0711-01 Cell Phone Accessories User Manual


 
En_01
20
Step 4: Network Settings
2 Obtain or select an IP address.
Highlight one of the following options
and press 2.
Obtain automatically: Select this option if
the network is configured to supply the
IP address automatically.
Enter manually: When prompted, enter an IP address and
subnet mask by pressing 4 and 2 to highlight segments
and 1 and 3 to change. Press J to proceed when entry is
complete.
3 Confirm the IP address.
The camera IP address will be displayed
as shown at right; press J. If Image
transfer or Camera control is selected,
proceed to Step 4; otherwise, proceed to
Step 7.
4 Connect the camera to the
computer.
When prompted, connect the camera to
the computer using the USB cable
supplied with the camera.
A Firewall Settings
Image transfer and camera control modes use TCP port 15740 and UDP port
5353. Computer firewalls must be configured to allow access to these ports,
as otherwise the computer may not be able to access the WT-5.