Filter
Top Products
Messages
40
Automate voice mail
Special characters, called dialing codes, can be added to phone numbers. Dialing
codes instruct the receiving system to pause, wait, bypass, or accept the numbers
that follow them in the dialing string. See "Insert dialing codes," p. 40.
Voice mail services vary by service provider. The following instructions are
examples of common operations. Please check with your service provider for
specific instructions for using your voice mail service.
Set up voice mail with dialing codes
1. Write down your voice mailbox number.
2. Call and check your voice mail as you normally would.
3. Write down your interaction with the recorded prompts step-by-step. Keep in
mind that each voice mail service may vary. However, it should be similar to
the following:
Dial 2145551212, pause 5 seconds, press 1, pause 2 seconds, press 1234,
press #.
4. In the standby mode, select Contacts > 1-touch dialing.
5. Scroll to an (empty) 1-touch dialing slot and select Assign.
6. Enter your voice mailbox number, including the area code.
7. Enter any dialing codes as necessary using the information that you wrote
down.
If you pause for 5 seconds after connecting to voice mail, enter p twice after
the voice mailbox number; for example, 2145551212pp.
8. Enter any remaining pauses or other information that allows you to listen to
your messages, and select OK.
9. Enter a name (such as voice mail), and select OK.
To dial and listen to your voice mail, in the standby mode, press and hold the
assigned 1-touch dialing key.
Insert dialing codes
Press * repeatedly to cycle through the dialing codes. Once the desired code
appears in the display, pause briefly. The code is inserted into the dialing string.
The following dialing codes are available:
* — Bypasses a set of instructions
Bravo_R200_Tracfone_080105.fm Page 40 Friday, August 12, 2005 2:23 PM