Filter
Top Products
Settings
53
Allow numbers when phone locked
When phone lock is on, the only outgoing calls that can be made are to the
emergency number programed into your phone (for example, 911) and the
number stored in the Allowed number when phone locked location.
To store an allowed number, do the following:
1. In the standby mode, select Menu > Settings > Security settings >Access
Codes. > Allowed number when phone locked.
2. Enter the lock code and select OK. See "Change lock code," p. 53.
3. Enter the phone number, and select OK.
Call an allowed phone number
In the standby mode, enter an allowed number and press the call key.
Change lock code
When you change your lock code, ensure that you store it in a safe place, away
from your phone. Avoid entering access codes similar to emergency numbers
such as 911 to prevent accidental dialing of the emergency number.
The preset lock code is 1234. If you enter an incorrect lock code five times in a
row, your phone will prompt you for the 5-digit security code. If you enter the
wrong security code five times in succession, you will not be able to enter a code
for 5 minutes, even if you power off the phone between incorrect entries.
1. In the standby mode, select Menu > Settings > Security settings >Access
Codes. > Change lock code.
2. Enter the current (or default) lock code, and select OK.
3. Enter the new lock code (must be 4 characters in length), and select OK.
4. Reenter the new lock code for verification, and select OK.
Change security code
Your phone contains a security code of 5 digits. When you change your security
code, make sure you store it in a safe place, away from your phone.
The preset security code is 12345. If you enter the wrong security code five times
in succession, you will not be able to enter a code for 5 minutes, even if you
power off the phone between incorrect entries.
Bravo_R200_Tracfone_080105.fm Page 53 Friday, August 12, 2005 2:23 PM