Filter
Top Products
If you do not make a selection, the phone uses the
default network setting, which is always active when
you switch on your phone. Check with your network
operator to find out the network default.
Menu 6 7, Network Feature Setting
Call Forwarding, Call Waiting, Selective Call
Acceptance, and Send Own Number are services
available through your network operator or dealer.
When you subscribe to any of these services, your
operator or dealer gives you a separate code that you
use to activate and deactivate each service.
Menu 6 7 lets you store all the codes you use in your
phone. Once you store the code in your phone, the
service appears as a menu item. You can then use the
menu to activate and deactivate
CALL FORWARD, CALL
WAITING, SELECTIVE CALL ACCEPTANCE,
and
SEND OWN
NUMBER
.
To remove an item from the menu, go through the
steps shown in “To Store Codes”, but simply press left
F (
OK
) after the
Feature code:
prompt (without entering
a code).
To store codes:
Left F (
Menu
) 67
at
Feature Code:
enter
the code you want to
store in your phone
(e.g. *74) then left
F (
OK
)
▼ to the service that
the code applies to,
then left
F (
OK
)
▼ to suboption (as
applicable) then left
F (
OK
)
▼ to
Activate
or
Cancel
left F (
OK
)
42