Nokia 2220/2260 User Guide 61
Copyright © 2003 Nokia
Advanced calling features
Set manual touch tones
1
Press
Menu
4-3-2-1
(
Settings > Phone settings > Touch tones > Manual
touch tones
).
2
Select one of the following options, then press
Select
:
Continuous:
Sounds tone for as long as you press and hold a key.
Fixed:
Sets the tone length to 0.1 second, regardless of how long you press a key.
Off:
Turns off the tones. No tones are sent.
Set touch tone length
You can also set the length of each touch tone.
1
Press
Menu 4-3-2-2
(
Settings > Phone settings > Touch tones > Touch
tone length
).
2
Use the
Scroll up
or
Scroll down
key to scroll to
Short
or
Long
.
Short sets the tone length to 0.1 second. Long sets the tone length to 0.5 second.
3
Press
Select
.
Store touch tone strings
You can store touch tone strings the same way that you store names and numbers
in your contact list. You can store an entire sequence of digits and send it as touch
tones for frequently used strings of numbers.
Character Action
p
Creates a
pause
when a number is dialed. The numbers you
enter after this special character are automatically sent as
touch tones after a 2.5-second pause.
w
Creates a
wait
when a number is dialed. This means that
your phone waits for you to press the left selection key
before it sends the number as touch tones.
*
Sends command strings to the network. Contact your
service provider for details.
+
Use this character to link a 1-touch dialing number to a
number in the contact list.