Filter
Top Products
Copyright © 2005 Nokia. All rights reserved.
Settings
19
The profile you set for expiration is
now active and appears in standby
mode along with a small clock icon.
■ Time settings
Select Menu > Settings > Time settings
and one of the following:
Clock—Set the device to show or hide
the current time in standby mode,
adjust the time, and select the 12- or
24-hour time format. If the battery
was removed from the device, you may
need to set the time and date again.
Date setting—Set the date. If the
battery was removed from the device,
you may need to set the date again.
Auto-update of date and time—Set the
device to update the date and time
from the network when you turn the
device on (network service). If the
clock in your device is 30 seconds or
more off the network time, the device
will be updated automatically to
reflect the network time. Select On,
Confirm first, or Off. If you select
Confirm first, the network requests
confirmation before updating the time.
You can accept or decline the update.
The automatic update of date and time
does not change the time you have set
for the alarm clock or the reminder
notes. Updating may cause some
alarms to expire without sounding.
■ Call settings
Select Menu > Settings > Call settings
and one of the following:
Call divert—Set your network to
redirect incoming calls to another
number.
Fold call handling—Set your device for
Delayed answering, Instant answering,
or Off.
Automatic redial—Set your device to
redial up to 10 times after an
unsuccessful call attempt. Select On or
Off.
Auto. serv. upd.—Automatically update
call settings. This feature is carrier
dependent.
Calling card—Set your device to use
your calling card. To enter the calling
card information, select Menu >
Settings > Call settings > Calling
card > Options > Add new or Edit
select your card sequence type, and
enter the information. Select OK to
confirm. Select Card name, enter the
card name, and select OK.
For information on making a call,
see “Calling cards”, p. 20.
Int. dial. prefix—Stores an international
dialling prefix (this feature is network
operator dependent). Enter the
international dialling prefix, and select
OK. To use the prefix, in standby mode,
press * twice to use +, and enter the
phone number.