Filter
Top Products
Copyright © 2005 Nokia. All rights reserved.
Settings
22
turn the phone lock Off. When the
phone is locked, calls still may be
possible to the official emergency
number programmed into your phone.
Allowed number when phone is
locked—Let you dial specific numbers
when the device is locked. You can
store up to three allowed phone
numbers. To enter a number,
press Select, highlight an empty
number slot, and select Assign. To edit
an existing number, press Select,
highlight the number and select
Options.
Change lock code—Let you change the
lock code. To select Change lock code,
enter the lock code, and press OK.
Enter your new lock code
(5 characters), and press OK. Enter the
new lock code again for verification,
and press OK.
Voice privacy—Let you protect the
privacy of your current phone
conversation from other callers placing
phone calls on your network. Select On
or Off.
■ Network settings
You can set your device to roam or
search for another network when you
are not in your home area. Your device
is set to search for the most cost-
effective network. These options are
network operator dependent and may
differ from those described.
In standby mode, select Menu >
Settings > Network settings >
Network. Select Home only to make
and receive calls in your home area
only, or Automatic to search for service
in another digital network.
The roaming rate applies when not in
the home service area. Press OK, if
necessary, to confirm the activation.
Network feature setting
Store a feature code
Feature codes can be set for Call divert,
and Send my caller ID with next call
network services.
1. In standby mode, select Menu >
Settings > Network settings >
Network feature setting and an
option.
2. Select an option within that
service. For example, Call divert >
Divert all voice calls > Activate.
3. At the Feature code: prompt,
enter the appropriate feature code
(5 characters or less).
You can enter other feature codes, or
press the end key to return to standby
mode. When you enter a network
feature code, the feature is visible in
the Call settings menu.