Filter
Top Products
[ 63 ]
Security and System settings
12 Security and System settings
Warning! Do not switch on the phone when wireless
phone use is prohibited or when it may cause interference
or danger.
Your phone has a variety of security features that help
prevent some of the following:
• Placing accidental or unintentional calls
• Unauthorized use of your phone
• Placing and accepting calls from certain phone numbers
• Accidental erasing of information or restoring factory settings
• LOCK KEYPAD (KEYGUARD)
With keypad lock (Keyguard) you can temporarily lock your phone keypad and
prevent the accidental placing of calls or pressing of the keypad (for example, when
the phone is in your pocket or in your purse).
Press
Menu > Keyguard, to activate Keyguard. You can also press Menu, followed by
*/+ (within 3 seconds), to activate Keyguard. It is possible to answer a call, even
though Keyguard is activated. Press the
Send key to answer the call. When the call
has ended, the keypad remains locked.
Press
Unlock, followed by */+ (within 3 seconds), to deactivate Keyguard and unlock
your phone keypad.
Important: appears at the top of the display. The left softkey is also
labeled Unlock.
Important: When the phone is locked, calls may be possible to the emergency number
programmed into your phone (for example, 911).
•SECURITY CODE
Your phone prompts you for a five-digit security code for certain features and
commands. Access is granted only after the correct security code has been entered
successfully.
The default security code is 12345. It is recommended that you change this code
at once, write it down, and store it in a safe place away from your phone.
You can delete the last entered digit by pressing
Clear (or by pressing and holding
Clear to delete all the digits more quickly). Enter the correct code or press Back to exit.
If you enter an incorrect security code,
Code error will appear five times in a row,
and your phone will not accept any entries for the next five minutes.