Filter
Top Products
Nokia 3100 and Nokia 3120 User Guide 43 Copyright © 2004 Nokia
Messages
Call and set up your voice mail
1 Once you have saved the voice mailbox number, press and hold the 1 key.
2 When you connect to voice mail and the prerecorded greeting begins, follow
the service’s automated instructions to set up your voice mail.
Listen to your voice messages
Once you have set up voice mail, you can dial the number in one of four ways:
• Dial the number, by using the keypad.
• Press and hold the 1 key.
• Select Listen if there is a notification message in the display.
• Select Menu > Messages > Voice messages > Listen to voice messages. After
a brief pause, your phone dials the voice mail number.
Once you connect and the prerecorded greeting begins, follow the automated
instructions to listen to your voice messages.
Automate voice mail
You can insert special characters called dialing codes into phone numbers such as
voice mail and then save the number to a 1-touch dialing location. Dialing codes
instruct the receiving system to pause, wait, bypass, or accept the numbers that
follow them in the dialing string.
Note: Each voice mail service can vary. The examples and steps that follow
are for clarification. Check with your service provider if you have specific
questions about your voice mail service.
NECESSARY INFORMATION
You will need this information in “Set up voice mail with dialing codes” on page 44.
Be sure to record all of the information correctly.
1 Write down your voice mailbox number, then call and check your voice mail
as you normally would.
2 Write down your interaction with the recorded prompts step-by-step. Keep in
mind that each voice mail service may vary. However, it should look something
like this:
Dial 2145551212, pause 5 seconds, press 1, pause 2 seconds, press 1234, press
pound key.
INSERT DIALING CODES
Press the Star key repeatedly to cycle through dialing codes. Once the desired code
appears in the display, pause briefly and the code is inserted into the dialing string.