Filter
Top Products
Setting the time
15
©
2001 Nokia Mobile Phones. All rights reserved.
3. Other Essential Functions
Setting the time
1. Press M (Menu) and use b to access Clock and press
M (Select).
2. Use b to access Clock settings, press M (Select).
3. Use b to scroll to Set the time and
press M (Select).
4. Key in the time, e.g. 0, 8, 3, 0
for 8:30.
5. Press M (OK) to confirm. The time is
displayed in the right-hand corner of the display.
Note: The car phone does not contain its own battery, therefore
the setting will be lost if the voltage of the car battery is low.
Selecting a ringing tone
1. Press M (Menu).
2. Use b to access Tones and press M (Select).
3. Use b to access Ringing tone and press M (Select).
4. Use b to scroll to the ringing tone you prefer. The phone
gives you a ringing sample. Press M (OK) to select it.
5. Press and hold c to exit the menu.
In-call options
Your phone provides a number of control functions that you can
use during a call. You cannot utilise all of these functions at all
times. Only those functions which are available and enabled will
be shown in the in-call menu.
Many of the in-call options are network services.
While you have a call in progress, press M (Options) to enter
the in-call menu. If the Navi key text is End, press c to acti-
vate the text Options.
The following in-call options may be available:
Hold or Unhold to hold or release a call
New Call to make a call during an on-going call
Answer to answer the incoming call
Reject to reject the incoming call
Swap to switch between the two calls
End this call to end the active call
Send DTMF to send DTMF tones
Send to send the character string on the display to
the network
End all calls to end both calls
Phone book to enter the Phone book
To exit the in-call menu, press c.
¹
Time:
OK
hh:mm