Filter
Top Products
14
If your phone is powered on and service is lost, the
message
Wait for service
will be displayed along with a
scrolling bar. The phone will continue to search for
available service for 15 minutes at which time it will
display
No service
if none is found.
Note: The phone will not work in analog mode while searching for
digital service.
Checking signal strength
When at the start screen (
see page 10
) or in a
call, the strength of the radio signal is
indicated by the signal indicators on the left
side of your phone’s display. These indicators
will move up as the strength of the signal
increases and down as it decreases.
Increasing your phone’s signal may be easy. Try moving
your phone slightly, or move towards a window if you’re
calling from inside a building.
Making a call
Your wireless phone does not have a dial tone. Simply
enter the phone number (including area code, as needed)
and press
NORMAL POSITION: Hold the phone as you would any other
telephone with the antenna pointed up and over your shoulder.
Editing a number on display
If you make a mistake while entering a number to dial,
press
V
to move the cursor to the left and
W
to move it
to the right. Press
Clear
to delete the character to the left
of the cursor.
Dialing a phone number stored in the phone book
View stored names and numbers by pressing
W
or
V
from
the start screen (
see page 8)
, then press
Calling card calls
See “Calling card” on page 26.