Filter
Top Products
43
Lock code
You’ll need the lock code to activate and deactivate
Phone Lock (
see page51
), or to change your lock code. The
default lock code is 0000
. If you enter an incorrect lock
code five times in a row,
your
phone will prompt you for
the security code
(
see page 60
).
Changing your lock code
In a lock code, only numeric characters are accepted.
1.
Enter
Menu
4-3-2-3 (
Settings
-
Security settings
-
Access codes
-
Change lock code
)
2.
Enter lock code at
Enter lock code:
and press
OK
3.
Enter new lock code, press
OK
4.
Verify new lock code, press
OK
Note: When you change your lock code, make sure you store it in a
safe place, away from your phone. Avoid entering access codes
similar to emergency numbers to prevent accidental emergency
calls.
Manual touch tones
This setting determines how long touch tones are
produced as you press the keys on the keypad. Note that
touch tones are sometimes called DTMF tones.
See “Touch tone length” on page 65 for details.
Setting manual touch tones
Press
Menu
4-2-3-1 (
Settings
-
Phone settings
-
Touch
tones
-
Manual touch tones
) and highlight one of the
following options, then press
OK.
Continuous
means the tone sounds for as long as
you press and hold the key.
Fixed
sets the tone length to .1 second, regardless
of how long you press the key.
Off
turns the tones off, and no tones will be sent
when you press the keys.