Nokia 6210 Cell Phone User Manual


 
11
Your device
Copyright © 2008 Nokia. All rights reserved.
Opening the slide unlocks the keypad. To unlock the keypad
when the slide is closed, press the left selection key and
select OK within 1.5 seconds.
When the device or keypad is locked, calls may be possible
to the official emergency number programmed into your
device.
Remote lock
You can lock your device and memory card remotely using
a text message. To enable remote locking and to define the
text message content to be used, select > Settings >
Phone sett. > General > Security > Phone and SIM card >
Remote phone locking > Enabled. Enter the text message
content (5 to 20 characters), verify it, and enter the lock
code.
Access codes
To set how your device uses the access codes, select >
Settings > Phone sett. > General > Security > Phone and
SIM card.
Lock code
The lock code (5 digits) helps to lock your device. The preset
code is 12345. Change the code, keep the new code secret
and in a safe place separate from your device.
To change the lock code, select > Settings > Phone
sett. > General > Security > Phone and SIM card > Lock
code. To activate the automatic locking of your device,
select Phone autolock period > User defined.
If you forget the code and your device is locked, your
device will require service and additional charges may
apply. For more information, please contact Nokia Care
Center.
When the device or keypad is locked, calls may be possible
to the official emergency number programmed into your
device.
PIN codes
The personal identification number (PIN) code or the
universal personal identification number (UPIN) code (4 to
8 digits) help to protect your SIM card. The (U)PIN code is
usually supplied with the SIM card. Set the device to
request the code each time the device is switched on,
select > Settings > Phone sett. > General > Security >
Phone and SIM card > PIN code request > On.
9208673_6210Navigator_en_apac_v1.0_web.fm Page 11 Friday, June 6, 2008 5:57 PM