Filter
Top Products
Insert the memory card
1 Remove the back cover.
2 Insert the card into the memory card slot, with the contact surface facing down,
and press until it locks into place.
3 Replace the back cover.
Remove the memory card
Important: Do not remove the memory card during an operation when the card is
being accessed. Doing so may damage the memory card and the device, and corrupt
data stored on the card.
You can remove or replace the memory card without switching the device off.
1 Ensure that no application is currently accessing the memory card.
2 Remove the back cover.
3 Gently push the memory card in, to release the lock, and remove the memory card.
4 Replace the back cover.
Charge the battery
Your battery has been partially charged at the factory. If the device indicates a low
charge, do the following:
1 Connect the charger to a wall outlet.
2 Connect the charger to the device.
3 When the device indicates a full charge, disconnect the charger from the device,
then from the wall outlet.
You can also charge the battery with a USB cable, using power from a computer.
1 Connect the USB cable to a USB port of a computer and to your device.
8Get started