Filter
Top Products
To check the current forwarding status,
scroll to the forwarding option, and select
Options > Check status.
To stop forwarding calls, scroll to the
forwarding option, and select Options >
Deactivate.
Call restrictions
Select
> Settings > Settings and
Phone > Call restriction.
You can restrict the calls that can be made
or received with the device (network
service). To modify the settings, you need
the restriction password from your service
provider. Call restriction affects all call
types.
Select from the following voice call
restriction settings:
Outgoing calls — Prevent making voice
calls with your device.
Incoming calls — Prevent incoming calls.
International calls — Prevent calling to
foreign countries or regions.
Incoming calls if roaming — Prevent
incoming calls when outside your home
country.
International calls except to home
country — Prevent calls to foreign
countries or regions, but allow calls to
your home country.
To check the status of voice call
restrictions, select the restriction option
and Options > Check status.
To deactivate all voice call restrictions,
select a restriction option and Options >
Deact. all restrictions.
To change the password used for
restricting voice, fax, and data calls, select
Options > Edit restriction passwd..
Enter the current code, then the new code
twice. The restriction password must be
four digits long. For details, contact your
service provider.
Network settings
Select
> Settings > Settings and
Phone > Network.
To select the network mode, select
Network mode and Dual mode, UMTS,
or GSM. In dual mode, the device switches
automatically between networks.
Tip: Selecting UMTS enables faster data
transfer, but may increase the demand on
battery power and reduce the battery life.
In regions close to both GSM and UMTS
networks, selecting Dual mode may
cause constant jumping between the two
networks, which also increases the
demand on battery power.
To select the operator, select Operator
selection and Manual to select from
available networks, or Automatic to set
the device to select the network
automatically.
To set the device to indicate when it is
used in a microcellular network (MCN),
select Cell info display > On.
20 Call functions
© 2010 Nokia. All rights reserved.