Filter
Top Products
14
Install or Remove the Battery
Install the Battery
Note: Always switch off the power and disconnect the
charger and any other device before removing the
cover. Avoid touching electronic components while
changing the cover. Always store and use the device
with the cover attached.
1. To remove the back cover, with the
back of the device facing you, push
down and slide the back cover
toward the bottom of the device.
2. Insert the gold-colored contacts of
the battery into the battery slot, and
push down the other end of the
battery to snap it into place.
3. To replace the back cover, align
the cover tabs with the slots in the
device, and slide the back cover
toward the top of the device until
the cover is securely in place.
7205.ENv1_9213749.fm Page 14 Tuesday, December 23, 2008 10:47 AM