Filter
Top Products
[ 68 ]
Call and set up your voice mail
1 Once you have saved the voice mailbox number, press and hold the
1 key.
2 When you connect to voice mail and the prerecorded greeting begins,
follow the service’s automated instructions to setup your voice mail.
Listen to your voice messages
Once you have set up voice mail, you can dial the number in one of
four ways:
• Dial the number using the keypad.
• Press and hold the 1 key.
•Select Listen if there is a notification message in the display.
•Select Menu > Messages > Voice messages > Listen to
voice messages. After a brief pause, your phone dials the voice
mail number.
Once you connect and the prerecorded greeting begins, follow the
automated instructions to listen to your voice messages.
Automate voice mail
You can insert special characters called dialing codes into phone numbers
such as voice mail and then save the number to a 1-touch dialing location.
Dialing codes instruct the receiving system to pause, wait, bypass, or
accept the numbers that follow them in the dialing string.
Note: Each voice mail service can vary. The examples and steps
that follow are for clarification. Check with your service provider
if you have specific questions about your voice mail service.
WRITE DOWN SOME INFORMATION
You will need this information in “Set up voice mail with dialing codes”
on page 69. Be sure to record all of the information correctly.
1 Write down your voice mailbox number.
2 Call and check your voice mail as you normally would.