Filter
Top Products
● Connect to support — to download the configuration settings from your service
provider
● Device manager sett. — to allow or prevent the phone from receiving software
updates. This option may not be available, depending on your phone.
See "Software
updates over the air", p. 35.
● Personal config. sett. — to manually add new personal accounts for various
services and to activate or delete them. To add a new personal account, select Add,
or Options > Add new. Select the service type, and enter the required parameters.
To activate a personal account, scroll to it, and select Options > Activate .
Security
When security features that restrict calls are in use (such as call barring, closed user
group, and fixed dialling), calls may be possible to the official emergency number
programmed into your device.
Select Menu > Settings > Security and from the following options:
● PIN code request or UPIN code request — to request for your PIN or UPIN code
every time the phone is switched on. Some SIM cards do not allow the code request
to be turned off.
● PIN2 code request — to select whether the PIN2 code is required when using a
specific phone feature which is protected by the PIN2 code. Some SIM cards do not
allow the code request to be turned off.
● Call barring service — to restrict incoming calls to and outgoing calls from your
phone (network service). A barring password is required.
● Fixed dialling — to restrict your outgoing calls to selected phone numbers if
supported by your SIM card. When the fixed dialing is on, GPRS connections are not
possible except while sending text messages over a GPRS connection. In this case,
the recipient’s phone number and the message center number must be included in
the fixed dialing list.
● Closed user group — to specify a group of people whom you can call and who can
call you (network service)
● Security level — Select Phone to request the security code whenever a new SIM
card is inserted into the phone. Select Memory, to request the security code when
the SIM card memory is selected, and you want to change the memory in use.
● Access codes — to change the security code, PIN code, UPIN code, PIN2 code, or
barring password
● Code in use — to select whether the PIN code or UPIN code should be active
● Authority certificates or User certificates — to view the list of the authority or user
certificates downloaded into your phone.
See "Certificates", p. 49.
● Security module sett. — to view Secur. module details, activate Module PIN
request, or change the module PIN and signing PIN.
See "Access codes", p. 9.
Settings
© 2008 Nokia. All rights reserved. 37