Filter
Top Products
Settings
62
Copyright © 2006 Nokia. All rights reserved.
in progress (network service). See
“Call waiting,” p. 25.
Summary after call > On — to
briefly display the approximate
duration and cost (network
service) of the call after each call
Send my caller ID (network
service) > Yes, or Set by network
Line for outgoing calls (network
service) — to select the phone line
1 or 2 to make calls, if supported
by your SIM card
Slide call handling — to set the
phone to answer calls when you
open the slide or end the calls
when you close it
■ Phone
Select Menu > Settings > Phone
and from the following options:
Language settings > Phone
language — to set the display
language of your phone. If you
select Automatic, the phone
selects the language according to
the information on the SIM card.
Language settings > SIM
language, to select the USIM card
language.
Language settings > Voice
playback language — to set a
language for the voice playback.
See “Enhanced voice dialing,” p. 24
and “Voice commands,” p. 57.
Memory status — to view the free
memory and the used memory for
each function in the list
Automatic keyguard — to set the
keypad of your phone to lock
automatically after a pre-set time
delay when the phone is in the
standby mode and no function of
the phone has been used. Select
On, and you can set the time from
5 seconds to 60 minutes.
Security keyguard — to set the
phone to ask for the security code
when you unlock the keyguard.
Enter the security code, and select
On.
When the keyguard is on, calls still
may be possible to the official
emergency number programmed
into your device.
Welcome note — to enter the
note you would like to be shown
briefly when the phone is switched
on
Operator selection > Automatic
— to set the phone automatically
to select one of the cellular
networks available in your area.
With Manual, you can select a
network that has a roaming
agreement with your home
network operator.
Confirm SIM service actions —
See “SIM services,” p. 88.