Filter
Top Products
nokia
CONNECTING PEOPLE
PAGE 13 (27) Approved 1.0
CMO Operations & Logistics
MGR
WW Competence Transfer
Multimedia Creation & Support CONFIDENTIAL 18.11.2005
Bochum / Germany
9. DISASSEMBLY INSTRUCTIONS
1.) Protect the window with a film.
2.) Fit protective film to the LCD Module.
3.) Press down the Latch and open the Battery Cover.
4.) Be sure that the battery is removed and then
continue with disassembly. Note to put back the
Sealing Tape after the re-assembly.
5.) Push the Latch and open the A-Cover Assy.
6.) Protect the LCD Module with a film.
7.) Remove the Keypad. Note the guide openings on
the UI Shield Assy when assembling the Keypad.
8.) Unscrew the four, Torx Plus
®
size 6 screws in the
shown order. Always use new screws when re-
assembling! For assembly, reverse the order and use a
Torx Plus
®
size 6 driver with a torque setting of
25Ncm.
Service Manual 9300i Level 1&2 Copyright © 2005 NOKIA Corporation. All rights reserved.