Filter
Top Products
71
Infrared (Menu 9)
In this menu you can set up your phone to
receive data through its infrared (IR) port. To use an IR connection,
the device with which you want to establish a connection must be
IrDA compliant.
The phone is a Class 1 Laser Product.
Setting the devices ready for infrared
connection
• The preferable distance between the two devices in infrared
connection is up to 60 cm.
• There must be no obstructions between the two communicating
devices.
• The IR ports of the two devices must point at each other.
Receiving data via the IR port
To receive data from another compatible phone:
1. Ensure that the two phones are ready for the IR connection.
2. Select the Infrared menu to activate the IR port for data
reception.
3. The user of the sending phone selects the desired IR function to
start data transfer.
If data transfer is not started within 45 seconds after the activation
of the IR port, the connection is cancelled and will have to be
started again.
Sending data via the IR port
You can send data to a compatible phone or PC provided with an
appropriate application.