Nokia N6270 Cell Phone User Manual


 
Call functions
12 Copyright © 2005 Nokia. All rights reserved.
Note: Using voice tags may
be difficult in a noisy
environment or during an
emergency, so you should
not rely solely upon voice
dialing in all circumstances.
1. In the standby mode, press and
hold the right selection key. A
short tone is played, and Speak
now is displayed.
If you are using a compatible
headset with the headset key,
press and hold the headset key to
start the voice dialing.
2. Say the voice command clearly. If
the voice recognition was
successful, a list with matches is
shown. The phone plays the voice
command of the match on the
top of the list. After about 1.5
seconds, the phone dials the
number; or if the result is not the
correct one, scroll to another
entry, and select to dial the entry.
Using voice commands to carry
out a selected phone function is
similar to voice dialing. See Voice
commands in "My shortcuts", on
page 42.
Answer or reject a call
To answer a call, press the call key. To
answer the call by opening the slide,
see also Slide call handling in "Call",
on page 49.
To mute the ringing tone before you
answer the call, select Silence.
To end the call, or to reject a call,
press the end key.
Tip: If the Divert if busy
function is activated to divert
the calls (for example, to your
voice mailbox), rejecting an
incoming call also diverts the
call. See "Call", on page 49.
If a compatible headset supplied
with the headset key is connected to
the phone, to answer and end a call,
press the headset key.
Call waiting
During a call, to answer the waiting
call, press the call key. The first call is
put on hold. To end the active call,
press the end key.
To activate the Call waiting function,
see "Call", on page 49.
Options during a call
Many of the options that you can
use during a call are network
services. For availability, contact
your network operator or service
provider.
Call options are Mute or Unmute,
Contacts, Menu, Lock keypad,
Record, Loudspeaker, or Handset.
Network services options are
Answer, Reject, Hold or Unhold, New