Filter
Top Products
You cannot change this setting after you save the account
settings or exit the wizard.
Incoming server — Enter the host name or IP address
of the POP3 or IMAP4 server that receives your mail.
Secure authentication — Set the system to use secure
authentication.
If you do not use secure connections, it is strongly
recommended that you enable secure authentication.
For information on the supported methods, contact your
mail service provider.
Secure connection — Define the security setting for
incoming messages.
If you access your mail over a wireless LAN (WLAN), it is
strongly recommended that you use secure connections.
For information on the supported secure connections,
contact your mail service provider.
Tip: Usually, the incoming mailbox servers (POP3 or
IMAP4) are provided by your mail service provider, and
the outgoing mail server (SMTP) is provided by your
internet service provider. If these service providers are
different, you may have different passwords and security
settings for incoming and outgoing messages.
6 Simple mail transfer protocol (SMTP) servers are used
when sending mail. To send mail, you must define the
SMTP host name or IP address that you obtain from the
mail service provider of the connection you use.
If you selected Other as the mail service provider, define
the following settings for outgoing mail:
Outgoing server — Enter the host name or IP address
of the server that sends your mail.
Secure authentication — Set the system to use secure
authentication.
Secure connection — Define the security setting for
outgoing messages.
Use connection-specific SMTP servers — Use
connection-specific SMTP servers for sending mail. To
modify connection-specific SMTP server settings, select
Edit SMTP servers.
Tip: The settings for outgoing mail (SMTP) usually either
use a user name and a password, or are specific to a
connection. Without an SMTP user name and password,
your internet service provider may prevent you from
sending mail for security reasons.
7 To complete the mail account setup, select Finish.
Set up a Mail for Exchange account
To use Mail for Exchange, you need a Mail for Exchange
account.
To set up an account:
1 Select
> E-mail, open the menu, and select New
account.
66 Mail
© 2010 Nokia. All rights reserved.