Filter
Top Products
21 1999 Nokia Mobile Phones. All Rights Reserved.
Español
You can enter several, maximum of 30 numbers,
at the same time. Press to separate the
different numbers.
For example, 990*9700 restricts the calls to any
numbers beginning with 990 and 9700.
Note: when calls are barred, calls may be
possible to certain emergency numbers in some
networks (e.g., 112 or some other official
emergency numbers).
Call Settings (Menu 4)
With submenus 4 0- 4 4 you can select
different call settings, such as ringing tone,
ringing volume, call alerting type and dialling
and answering modes.
Ringing Tone (Menu 4 0)
The phone is provided with 12 types of ringing
tones. To select the tone you like best, scroll
between different ringing tone types with keys
and . Use OK selection key to select the
ringing type you prefer.
Ringing Volume (Menu 4 1)
You will hear the ringing tone when there is an
incoming call. There are 4 different levels of
tone volumes you can choose from.
Call Alert (Menu 4 2)
This allows you to select the desired type of alert
from the following options:
Ring & Vibr.: Ringing tone normal and with the
vibrator.
Ringing: Only the ringing tone is active.
Vibrate: Only the vibrator is active, all ringing
tones are inactive.
Silent: All tones are turned off, only the lights
blink and a message indicating a call appears on
the display during an incoming call and there is
a short beep. The message SILENT is displayed in
standby mode.
Note: The vibrating options operate only when a
vibra battery is used.
1-Touch Dialling (Menu 4 3)
You can enable the 1-9 keys to make a call to a
number stored in one of those particular
memory locations. When the 1-Touch Dialling is
selected as On, you can call a number in memory
locations 1-9 simply by pressing the desired
number key.
Note: If you wish to use the 1-Touch Dialling
function for listening your voice mail, you have
to store the voice mailbox number into the
memory location 1 and select the 1-Touch
Dialling as On. Then you can call your voice
mailbox number by pressing and holding
number 1. You can use memory location 1
together with 1-Touch Dialling only for
checking voicemail messges.
Automatic Answer (Menu 4 4)
This function is used in connection with a
headset and with the Handsfree-facility of the
carkit. You can select the automatic answer to
be either On/ Off with the Select key.
Note: if the SILENT SERVICE function is On,
AUTOMATIC ANSWER function is not available.
Send DTMF Tones (Menu 5)
You can transmit numeric data as a series of
tones, for example, to check your answering
machine.
You can either send DTMF (Dual Tone Multi
Frequency) tones through the phone’s DTMF
tone generator, or you can use the MFT service
of the NMT system. Sending DTMF tones by the
MFT service is more reliable in poor transmission
conditions.