Filter
Top Products
22 1999 Nokia Mobile Phones. All Rights Reserved.
I Manual DTMF Dialling
Make the call in the usual way (see ‘Making
a Call’).
Key in the numbers onto the display. Each
number is sent directly as a DTMF tone. The
length of the tone depends on how long you
press the key.
II Manual DTMF Dialling through the MFT Service
Make the call in the usual way.
Press Menu 5 to select the MFT service. The
D indicator will appear on the display.
Key the numbers onto the display. Each
number is directly sent as a DTMF tone. The
D indicator flashes as each tone is sent.
Press the Stop selection key to switch off the
MFT service.
III Automatic DTMF Dialling through MFT
Service
This feature allows you to recall a number from
a memory location and send it as a complete
number. (Check that you have the number
stored in the memory).
Make the call in the usual way.
Press Memory, Find to recall the number
from the memory location. Or use the
and keys to scroll through the memory
locations until you find the right number.
Press Quit.
Press Menu 5 to activate the MFT service.
The number stored in the memory location is
automatically sent as DTMF tones (the D
indicator flashes during transmission.)
If the D indicator remains on after the
transmission, use the
Stop selection key to
return to normal operation.
You cannot speak into the phone when the MFT
service is on. Even if the keytones are turned off,
the DTMF tones can still be sent.
Placing a Pause between DTMF Tone Strings.
When you store the DTMF numbers in the
memory, you can add pause characters in the
middle of the string of digits. It may be that your
answering machine requires a pause between
your password and the code for “play messages”.
To create a pause of 2.5 seconds in the string,
press the key three times (shown as p on
the display).
Alarm Options (Menu 6)
Countdown Timer (Menu 6 0)
This menu function is a personal reminder. After
a certain period of time, determined as
described in steps 1-4 , you will hear an alerting
tone and the message COUNTDOWN TIME UP!
appears on the display.
To set the countdown timer:
Press Menu 6 0. Activate, Cancel and Status
will appear on the display.
Press OK to select an option. The message
’Set timer:’ appears.
Use the number keys to set the desired
countdown time.
Press OK to accept the set countdown time.
To stop the phone alerting and to clear the
message from the display after the countdown
time is up:
Press the OK key.
With the ‘Status’ option, you can check if the
timer alarm is set and how much countdown
time is left.
Alarm Clock (Menu 6 1)
You can set the alarm on your phone, if it gets
the right time from the local NMT 450. To set
the alarm:
Press Menu 6 1. Activate, Cancel and Status
will appear on the display.