Filter
Top Products
9 1999 Nokia Mobile Phones. All Rights Reserved.
Español
2. Basic Functions
Making A Call
Key in the number (include the area code,
even if you are making a local call).
If you make a mistake you can delete the last
number by pressing or clear the whole
display, by pressing and holding for half a
second.
Press .
The indicator and the dialled number
will
appear on the display. When the number clears
from the display and a tone is heard, the phone
has transmitted the number.
Lift the phone to your ear, and wait until
your call is answered, then speak.
When you have finished the call, press .
If the message LOCKED appears on the display,
your phone has been locked. (see ‘Security
Options’). When the phone is locked, calls may
be possible to the emergency number
preprogrammed into your phone (e.g., 112 or
some other official emergency number).
Also, calls to the numbers in memory locations
94, 95, 96, and 97 may be made and all calls
may be received.
(see ‘Memory’)
To redial the last number called:
Press twice.
International Calls
Note: This function is operational only if the
local network supports it. Check with the
network service operator.
When calling abroad a + character can be
inserted in front of the country code instead of
the international access code.
For example, when calling abroad from Finland,
instead of dialling
990 010 81 123 456
+ 010 81 123 456 can be used.
Press the key twice to insert
a + character.
If you also store all of your domestic phone
numbers with the prefix +, you need not insert
the phone number with the international access
codes when you wish to call these numbers from
abroad.
If the network does not support this function,
a message PREFIX + CANNOT BE USED may
appear on the display. Then, the international
access code must be keyed in.
Receiving A Call
When there is an incoming call, you will hear
the ringing tone and the text CALL appears on
the display. If the ringing tone has been
switched off - the SILENT SERVICE feature has
been selected for privacy or other reasons - the
lights will flash instead and only a short beep
will be heard (see ‘Call Alert’). An easy way to
select the SILENT SERVICE feature ON is
to press Menu and .
If the caller can be identified (if the network
supports this function), the caller’s phone
number (or the name, if it is stored in the
memory) appears on the display together with
the text CALLING.
Note: This function, which enables the caller to
be identified, is operational only if the local
network supports it. Check with the network
service operator.
If the call is diverted from another number, the
indicator appears on the right-hand side of
the third display row. If the caller cannot be