Filter
Top Products
143Copyright © 2005 Nokia. All rights reserved.
To prevent line selection, select Line change→Disable if supported by your SIM
card. To change this setting, you need the PIN2 code.
Connection settings
Select Connection settings.
Access points
Here you can see a short explanation for every setting that may be needed for
different data connections and access points. If you have not yet used your phone
to make a WAP connection, you may need to contact your service provider for
assistance with the first-time connection.
Many service providers require you to use an IAP for your default access point.
Other service providers allow you to use a WAP access point. Contact your service
provider for more information.
Start to fill in the settings from the top since, depending on the data connection
you select (Data bearer), only certain fields are available.
• Connection name - Give a descriptive name for the connection.
• Data bearer - The options are GPRS or Data call. Depending on what data
connection you select, only certain setting fields are available. Fill in all fields
marked with Must be defined, or with an asterisk. Other fields can be left
empty, unless you have been instructed otherwise by your service provider.
To be able to use a data connection, the network operator or service provider must
support this feature, and if necessary, activate it for your SIM card