Filter
Top Products
[ 72 ]
13
Change your PIN or PIN2 code
The default PIN code is 1234, and the default PIN2 code is 5678. You can
change your PIN or PIN2 code to any 4- to 8-digit number.
1
Press
Menu
5 6 5.
When
Change PIN code
appears, press
Select
.
If SIM card security is not set to on, you’ll be prompted to
activate it. See “Set SIM card security” below for details.
2
Enter the current PIN code and press
OK
.
3
Enter the new PIN code and press
OK
.
4
Enter the new PIN code again to verify, and press
OK
.
If you make a mistake while entering the code,
Code Error
appears.
Start again at step 2 and be careful to enter the correct code. If
you enter the wrong code three times in a row, the PIN code is
blocked. To unblock the PIN code, see “PUK codes” on page 73.
Set SIM card security
This feature sets your phone to ask for the PIN code each time the phone
is switched on and prevents unauthorized use of your phone.
1
Press
Menu
5 6 1.
2
When
Enter PIN code
appears, enter the PIN code supplied by your
service provider, and press
OK
.
3
Press (up or down) to highlight
On
and press
OK
.
To turn off this feature, repeat steps 1 through 3 above, but highlight
Off
in step 3.
If you enter the wrong PIN or PIN2 code three times in a row, the
SIM card is automatically blocked or you cannot activate the
function. See "PUK codes" below to unblock the codes.