Filter
Top Products
Copyright © 2002 Nokia. All rights reserved.
78
• Homepage - Key in the homepage address of the WAP service that you
want to use, press for a dot and press OK.
• Session mode - Select Permanent or Temporary.
• Connection security - Select On or Off.
When the connection security is On, the phone tries to use a secure
connection to the WAP service. If a secure connection is not available, the
connection will not be made. If you wish to connect anyway, with a non-
secure connection, you must set the connection security to Off.
• Data bearer - Select GSM data or GPRS. For settings for the selected bearer,
see Settings when GSM data is the selected data bearer and Settings when
GPRS is the selected data bearer below.
For pricing, connection speed, and other information, contact your network
operator or service provider.
Settings when GSM data is the selected data bearer
• Dial-up number - Key in the phone number and press OK.
• IP address - Key in the address, press for a dot and press OK. You can
obtain the IP address from your network operator or service provider.
• Authentication type - Select Secure or Normal.
• Data call type - Select Analogue or ISDN.
• Data call speed - Select the speed you want to use, or select Automatic.
Automatic is only available if the currently selected data call type is Analogue.
The actual data call speed depends on the service provider.