Filter
Top Products
[ 95 ]
Advanced features
• If the voice tag memory is full, the phone displays Delete an existing
voice tag? Press OK, scroll to locate a tag to delete, then press Delete.
• Deleting a phone number deletes any associated voice tags.
Warning! Do not use a voice tag for dialing emergency numbers.
In emergencies, stress causes changes in your voice, which may
keep the phone from recognizing your voice command.
Dialing a number using voice dialing
Note: You must say the name exactly as you said it when you
recorded it.
1 At the Start screen, press and hold Names for two seconds. A tone is
heard and Please speak now is displayed.
2 After the tone, clearly speak the voice tag that you recorded previously
into the microphone.
Note: If the voice tag is not recognized by the phone (or if you fail
to speak a tag within three seconds after the tone), the message
Name not recognized is displayed, and you are returned to the Start
screen.
3 When the voice tag is recognized:
• the phone book entry will be displayed on the screen for three
seconds AND
• the voice tag is replayed (via the ear piece).
After three seconds, the number is dialed.
The only other option for initiating voice dialing is to press the headset
button momentarily at the Start screen. The alert tones plays through the
headset.
Speak the voice tag into the headset microphone. The voice tag will
playback through the headset to confirm your choice.
En3570.book Page 95 Wednesday, September 11, 2002 3:08 PM