Filter
Top Products
[ 84 ]
Use a voice command
Warning! Do not use voice command in an emergency situation.
In emergencies, stress causes changes in your voice, which may
keep the phone from recognizing your voice command.
1 At the Start screen, press and hold Names for one to two seconds. A tone
is heard and Please speak now is displayed.
2 After the tone, clearly speak the voice tag that you recorded previously
into the microphone.
The only other option for initiating a voice command is to press the
headset button momentarily at the Start screen. The alert tones plays
through the headset.
Speak the voice tag into the headset microphone. The voice tag will
playback through the headset to confirm your choice.
Work with voice tags
You can listen to an existing voice tag (in case you forgot what you
recorded), re-record a voice tag, or delete an existing tag.
1 Press Menu 7-2 (Voice > Voice commands).
2 Scroll to the menu option you wish to tag, then press Select.
3 Press Options, scroll to either Playback, Change, or Delete, and press
Select.
Note: If you chose Change, press Start to record again. The new
tag that is recorded replaces the old information.
En3570.book Page 84 Wednesday, September 11, 2002 3:08 PM