Filter
Top Products
General information
10
PUK codes
The personal unblocking key (PUK) code and the universal personal
unblocking key (UPUK) code (eight digits) is required to change a
blocked PIN code and UPIN code, respectively. The PUK2 code is required
to change a blocked PIN2 code.
If the codes are not supplied with the SIM card, contact your service
provider for the codes.
Barring password
The barring password (four digits) is required when using Call barring
service. See “Security,” p. 68. You can obtain the password from your
service provider.
If you enter an incorrect barring password three times in succession, the
password is blocked. Contact your service provider for assistance.
■ Copyright protection
Copyright protections may prevent some images, music (including ringing tones),
and other content from being copied, modified, transferred or forwarded.
■ Configuration settings service
To use some of the network services, such as mobile Internet services,
MMS, or remote Internet server synchronization, your phone needs the
correct configuration settings. You may be able to receive the settings
directly as a configuration message. After receiving the settings, you
need to save them on your phone. The service provider may provide a
PIN that is needed to save the settings. For more information on
availability of the settings, contact your service provider.
When you have received a configuration message, Configuration sett.
received is displayed.
To save the settings, select Show > Save. If the phone requests Enter
settings' PIN:, enter the PIN code for the settings, and select OK. To
receive the PIN code, contact the service provider who supplies the
settings. If no settings are saved yet, these settings are saved and set as
RM-198_UG_en1_issue1_corrections_20061108.fm Page 10 Wednesday, November 29, 2006 2:00 PM