Filter
Top Products
Push to talk
85
To add a provisioned channel, select Menu > Push to talk > Add
channel > Options > Edit add. manually. Enter the channel address
provided by your service provider.
Receive an invitation
When you receive a text message invitation to a group, Channel
invitation received: is displayed.
1. To view the contact who sent the invitation and the channel address
if the group is not a private channel, select View.
2. To add the channel to your phone, select Save.
3. To set the status for the channel, select Active or Inactive.
4. To reject the invitation, select View > Discard > Yes.
■ PTT settings
There are two kinds of PTT settings: settings for connecting to the
service and settings for use.
You may receive the settings for connecting to the service from your
network operator or service provider. See “Configuration settings
service,” p. 10. You can enter the settings manually. See
“Configuration,” p. 67.
To select the settings for connecting to the service, select Menu > Push
to talk > Config. settings and one of the following options:
Configuration — to select a service provider, Default, or Personal config.
for PTT service. Only the configurations that support the PTT service are
shown.
Account — to select a PTT service account in the active configuration
settings.
You can also select from other available options.
To edit the PTT settings for use, select Menu > Push to talk > PTT
settings, and one of the following options:
1 to 1 calls > On — to set the phone to allow the reception of one-to-
one calls. To make but not receive one-to-one calls, select Off. The
RM-198_UG_en1_issue1_corrections_20061108.fm Page 85 Wednesday, November 29, 2006 2:00 PM