Filter
Top Products
Call functions
25
Note: Using voice tags may be difficult in a noisy environment or
during an emergency, so you should not rely solely upon voice dialing
in all circumstances.
1. In the standby mode, press and hold the right selection key. A short
tone is played, and Speak now is displayed.
If you are using a compatible headset with the headset key, press and
hold the headset key to start the voice dialing.
2. Say the voice command clearly. If the voice recognition is successful,
a list with matches is shown. The phone plays the voice command of
the match on the top of the list. After about 1.5 seconds, the phone
dials the number; or if the result is not the correct one, scroll to
another entry, and select to dial the entry.
Using voice commands to carry out a selected phone function is
similar to voice dialing. See Voice commands in “My shortcuts,”
p. 58.
■ Answer or reject a call
• Open the fold, or press the call key to answer the call. To mute the
ringing tone, select Silence, if the fold is open or if the fold is closed,
press the volume up/down key.
• To reject an incoming call when the fold is open, press the end key.
If Divert if busy is activated in your voice mailbox, the call is forwarded
to your voice mail. If not, the call is rejected. If a compatible headset
supplied with the headset key is connected to the phone, press the
headset key to answer and end a call.
Call waiting
Call waiting is a network service. To answer the waiting call during an
active call, press the call key. The first call is put on hold. To end the
active call, press the end key.
To activate the Call waiting function, see “Call,” p. 65.
RM-198_UG_en1_issue1_corrections_20061108.fm Page 25 Wednesday, November 29, 2006 2:00 PM