Filter
Top Products
97Copyright © 2005 Nokia. All rights reserved.
• When needed to set the (E)GPRS registration and connection to established
when an application using (E)GPRS needs it and closed when you end the
application.
(E)GPRS modem settings
You can connect the phone using Bluetooth wireless technology, infrared, or data
cable (DKU-2) connection to a compatible PC and use the phone as a modem to
enable (E)GPRS connectivity from the PC.
To define the settings for (E)GPRS connections from your PC, select Menu >
Settings > Connectivity > GPRS > GPRS modem settings > Active access point,
activate the access point you want to use, and select Edit active access point.
Select Alias for access point, enter a name to change the access point settings, and
select OK. Select GPRS access point, enter the access point name (APN) to
establish a connection to an (E)GPRS network, and select OK.
You can also set the (E)GPRS dial-up service settings (access point name) on your
PC using the Nokia Modem Options software. See PC Suite on page 151. If you
have set the settings both on your PC and on your phone, the PC settings are used.
USB data cable
The USB data cable can be used for transfering data between the multimedia card
inserted in the phone and a compatible PC, and for PC Suite.
To activate the multimedia card for data transfer, connect the data cable, and
when the phone displays Use phone as storage device?, select Accept. To use the
cable for PC Suite, select Reject.